- HELP
BotServ allows you to have a bot on your own channel. It has been created for users that can't host or configure a bot, or for use on networks that don't allow users' bot. Available commands are listed below; to use them, type /msg BotServ command. For more information on a specific command, type /msg BotServ HELP command.
BOTLIST Lists available bots ASSIGN Assigns a bot to a channel SET Configures bot options KICK Configures kickers BADWORDS Maintains bad words list
Other commands: ACT INFO SAY UNASSIGN
Bot will join a channel whenever there is at least <num> user(s) on it. - BOTLIST
Syntax: /msg BotServ BOTLIST
Lists all available bots on this network. - ASSIGN
Syntax: /msg BotServ ASSIGN chan nick
Assigns a bot pointed out by nick to the channel chan. You can then configure the bot for the channel so it fits your needs. - UNASSIGN
Syntax: /msg BotServ UNASSIGN chan
Unassigns a bot from a channel. When you use this command, the bot won't join the channel anymore. However, bot configuration for the channel is kept, so you will always be able to reassign a bot later without have to reconfigure it entirely. - INFO
Syntax: /msg BotServ INFO {chan | nick}
Allows you to see BotServ information about a channel or a bot. If the parameter is a channel, then you'll get information such as enabled kickers. If the parameter is a nick, you'll get information about a bot, such as creation time or number of channels it is on. - SET
Syntax: /msg BotServ SET channel option parameters
Configures bot options. option can be one of:
DONTKICKOPS To protect ops against bot kicks DONTKICKVOICES To protect voices against bot kicks GREET Enable greet messages FANTASY Enable fantaisist commands SYMBIOSIS Allow the bot to act as a real bot
Type /msg BotServ HELP SET option for more information on a specific option.
Note: access to this command is controlled by the level SET. - SET DONTKICKOPS
Syntax: /msg BotServ SET channel DONTKICKOPS {ON|OFF}
Enables or disables ops protection mode on a channel. When it is enabled, ops won't be kicked by the bot even if they don't match the NOKICK level. - SET DONTKICKVOICES
Syntax: /msg BotServ SET channel DONTKICKVOICES {ON|OFF}
Enables or disables voices protection mode on a channel. When it is enabled, voices won't be kicked by the bot even if they don't match the NOKICK level. - SET FANTASY
Syntax: /msg BotServ SET channel FANTASY {ON|OFF}
Enables or disables fantasy mode on a channel. When it is enabled, users will be able to use commands !op, !deop, !voice, !devoice, !kick, !kb, !unban, !seen on a channel (find how to use them; try with or without nick for each, and with a reason for some?).
Note that users wanting to use fantaisist commands MUST have enough level for both the FANTASIA and another level depending of the command if required (for example, to use !op, user must have enough access for the OPDEOP level). - SET GREET
Syntax: /msg BotServ SET channel GREET {ON|OFF}
Enables or disables greet mode on a channel. When it is enabled, the bot will display greet messages of users joining the channel, provided they have enough access to the channel. - SET SYMBIOSIS
Syntax: /msg BotServ SET channel SYMBIOSIS {ON|OFF}
Enables or disables symbiosis mode on a channel. When it is enabled, the bot will do everything normally done by BotServ on channels, such as MODEs, KICKs, and even the entry message. - KICK
Syntax: /msg BotServ KICK channel option parameters
Configures bot kickers. option can be one of:
BOLDS Sets if the bot kicks bolds BADWORDS Sets if the bot kicks bad words CAPS Sets if the bot kicks caps COLORS Sets if the bot kicks colors FLOOD Sets if the bot kicks flooding users REPEAT Sets if the bot kicks users who repeat themselves REVERSES Sets if the bot kicks reverses UNDERLINES Sets if the bot kicks underlines
Type /msg BotServ HELP KICK option for more information on a specific option.
Note: access to this command is controlled by the level SET. - KICK BOLDS
Syntax: /msg BotServ KICK channel BOLDS {ON|OFF} [ttb]
Sets the bolds kicker on or off. When enabled, this option tells the bot to kick users who use bolds. ttb is the number of times an user can be kicked before it get banned. Don't give ttb to disable the ban system once activated. - KICK COLORS
Syntax: /msg BotServ KICK channel COLORS {ON|OFF} [ttb]
Sets the colors kicker on or off. When enabled, this option tells the bot to kick users who use colors. ttb is the number of times an user can be kicked before it get banned. Don't give ttb to disable the ban system once activated. - KICK REVERSES
Syntax: /msg BotServ KICK channel REVERSES {ON|OFF} [ttb]
Sets the reverses kicker on or off. When enabled, this option tells the bot to kick users who use reverses. ttb is the number of times an user can be kicked before it get banned. Don't give ttb to disable the ban system once activated. - KICK UNDERLINES
Syntax: /msg BotServ KICK channel UNDERLINES {ON|OFF} [ttb]
Sets the underlines kicker on or off. When enabled, this option tells the bot to kick users who use underlines. ttb is the number of times an user can be kicked before it get banned. Don't give ttb to disable the ban system once activated. - KICK CAPS
Syntax: /msg BotServ KICK channel CAPS {ON|OFF} [ttb [min [percent]]]
Sets the caps kicker on or off. When enabled, this option tells the bot to kick users who are talking in CAPS. The bot kicks only if there are at least min caps and they constitute at least percent%% of the total text line (if not given, it defaults to 10 characters and 25%%). ttb is the number of times an user can be kicked before it get banned. Don't give ttb to disable the ban system once activated. - KICK FLOOD
Syntax: /msg BotServ KICK channel FLOOD {ON|OFF} [ttb [ln [secs]]]
Sets the flood kicker on or off. When enabled, this option tells the bot to kick users who are flooding the channel using at least ln lines in secs seconds (if not given, it defaults to 6 lines in 10 seconds).
ttb is the number of times an user can be kicked before it get banned. Don't give ttb to disable the ban system once activated. - KICK REPEAT
Syntax: /msg BotServ KICK #channel REPEAT {ON|OFF} [ttb [num]]
Sets the repeat kicker on or off. When enabled, this option tells the bot to kick users who are repeating themselves num times (if num is not given, it defaults to 3). ttb is the number of times an user can be kicked before it get banned. Don't give ttb to disable the ban system once activated. - KICK BADWORDS
Syntax: /msg BotServ KICK #channel BADWORDS {ON|OFF} [ttb]
Sets the bad words kicker on or off. When enabled, this option tells the bot to kick users who say certain words on the channels. You can define bad words for your channel using the BADWORDS command. Type /msg BotServ HELP BADWORDS for more information. ttb is the number of times an user can be kicked before it get banned. Don't give ttb to disable the ban system once activated. - BADWORDS
Syntax:
/msg BotServ BADWORDS channel ADD word [SINGLE | START | END]
/msg BotServ BADWORDS channel DEL {word | entry-num | list}
/msg BotServ BADWORDS channel LIST [mask | list]
/msg BotServ BADWORDS channel CLEAR
Maintains the bad words list for a channel. The bad words list determines which words are to be kicked when the bad words kicker is enabled. For more information, type /msg BotServ HELP KICK BADWORDS.
The BADWORDS ADD command adds the given word to the badword list. If SINGLE is specified, a kick will be done only if an user says the entire word. If START is specified, a kick will be done if an user says a word that starts with word. If END is specified, a kick will be done if an user says a word that ends with word. If you don't specify anything, a kick will be issued every time word is said by an user.
The BADWORDS DEL command removes the given word from the bad words list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.)
The BADWORDS LIST command displays the bad words list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example:
BADWORDS #channel LIST 2-5,7-9 Lists bad words entries numbered 2 through 5 and 7 through 9.
The BADWORDS CLEAR command clears all entries of the bad words list. - SAY
Syntax: /msg BotServ SAY channel text
Makes the bot say the given text on the given channel. - ACT
Syntax: /msg BotServ ACT channel text
Makes the bot do the equivalent of a "/me" command on the given channel using the given text. - SERVADMIN HELP
The following command is available to Services admins:
BOT Maintains network bot list - SERVADMIN BOT
Syntax:
/msg BotServ BOT ADD nick user host real
/msg BotServ BOT CHANGE oldnick newnick [user [host [real]]]
/msg BotServ BOT DEL nick BOT LIST
Allows Services admins to create, modify, and delete bots that users will be able to use on their own channels.
BOT ADD adds a bot with the given nickname, username, hostname and realname. Since no integrity checks are done for these settings, be really careful.
BOT CHANGE allows to change nickname, username, hostname or realname of a bot without actually delete it (and all the data associated with it).
BOT DEL removes the given bot from the bot list.
BOT LIST is an alias of BOTLIST and just lists all bots available on the network.
Note: if you create a bot that has a nick that is registered, it will be dropped. Also, if an user is currently using the nick, it will be killed. - SERVADMIN SET
These options are reserved to Services admins:
NOBOT Prevent a bot from being assigned to a channel PRIVATE Prevent a bot from being assigned by non IRC operators - SERVADMIN SET NOBOT
Syntax: /msg BotServ SET channel NOBOT {ON|OFF}
This option makes a channel be unassignable. If a bot is already assigned to the channel, it is unassigned automatically when you enable the option.
Limited to Services admins. - SERVADMIN SET PRIVATE
Syntax: /msg BotServ SET bot-nick PRIVATE {ON|OFF}
This option prevents a bot from being assigned to a channel by users that aren't IRC operators.
Limited to Services admins.
